不固化液態墊片密封劑/涂層/涂覆劑,是一種粘度低,可刷涂或填充于材料的小間隙部位。它的持續工作溫度最高可達204℃。同時耐防凍劑、飛機燃料、強去垢劑和強潤滑劑。符合軍標MIL-S-45180 D, TYPE III。
不固化液態墊片密封劑/涂層/涂覆劑,是一種粘度低,可刷涂或填充于材料的小間隙部位。它的持續工作溫度最高可達204℃。同時耐防凍劑、飛機燃料、強去垢劑和強潤滑劑。符合軍標MIL-S-45180 D, TYPE III。
不固化液態墊片密封劑/涂層/涂覆劑,是一種粘度低,可刷涂或填充于材料的小間隙部位。它的持續工作溫度最高可達204℃。同時耐防凍劑、飛機燃料、強去垢劑和強潤滑劑。符合軍標MIL-S-45180 D, TYPE III。
包裝規格
型號 | 包裝規格 | 每箱數量 | 產品代號 |
80018 | 2盎司瓶裝 | 12 | 3 |
80019 | 4盎司瓶裝 | 12 | 3H |
80017 | 16盎司瓶裝 | 12 | 3D |
Technical Data Sheet Permatex Aviation Form A Gasket No 3 Sealant PRODUCT DESCRIPTION: Permatex Aviation Form A Gasket No 3 Sealant is a dark reddish brown, viscous liquid with a characteristic alcoholicodor. It is a slow drying, liquid that changes to a pliable, tacky film through solvent evaporation. It seals colose fitting parts, machined surfaces and threaded connections in industrial, aircraft,marine and automotive applications.Conforms to MIL-S-45180D Type III. PRODUCT BENEFITS: ● For colse tolerance flanges ● Slow drying ● Flexible setting ● Withstands pressures to 5000 psi TYPICAL APPLICATIONS: ● Solid gasket dressing ● Close fitting machined surfaces ● Threaded connections ● Aviation engines ● Marine engines DIRECTIONS FOR USE:
For Cleanup
PROPERTIES OF UNCURED MATERIAL Typical Val ue Chemical Type Modified resin,fillers&alcohol Appearance Dark brown liquid Odor Alcoholic Specific Gravity 1.1 Viscosity Viscous liquid Flash Point, TCC, F 60 | | TYPICAL CURING PERFORMANCE Permatex Aviation Form A Gasket No 3 Sealant once applied, develops into a pliable, tacky seal by solvent evaporation. Dry times will vary with temperature, humidity and gap. TYPICAL ENVIRONMENTAL TESISTANCE Temperature Resistance Typical Values Continuous,℃(F) -54 to 204 (-65 to 400) Chemical/Solvent Resistance The product retains effective properties in contact with water, ethylene glycol, gasoline, motor oil, transmission fluid and seawater. GENERAL INFORMATION: This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. For safe handling information on this product, consult the Material Safety Data Sheet,(MSDS). STORAGE Products shall be ideally stored in a cool, dry location in unopende containers at a temperature between 8℃ to 28℃ (46 to 82 F)unless otherwise labeled. Optimal storage is at the lower half of this temperature range, To prevent contamination of unused product, do not return any material to its original conrainer. NOTE: The data contained herein are furnished for information only and are believed to be reliable, We cannot assume responsibility for the results obtained by others over whose methods we have no control, Permatex, Inc.specifically disclaims all warranties expressed or implide, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Permatex, Inc. products and disclaims any liability for consequential or incidental damages of any kind, including lost profits, This product may be covered by one or more United States or foreign patents or patent applications. |
●避免與皮膚及眼睛直接接觸,請于使用時戴上塑膠手套及安全護目鏡。
●若因接觸皮膚引起過敏及紅斑,請以肥皂及清水沖洗;若不慎觸碰到眼睛時,請立即以清水沖洗并就醫診查
●勿吞食、勿讓孩童取用。
●使用本材料的工作環境須通風良好,勿在密閉空間使用。