Permatex Copper Anti Seize Lubricant
泰揚銅基螺紋防卡潤滑劑
Permatex Copper Anti Seize Lubricant
泰揚銅基螺紋防卡潤滑劑
一種高質量的螺紋防卡潤滑劑。即使在高溫高負載環境下,同樣可以避免螺紋、螺扣等金屬連接件產生擦傷、卡死、腐蝕等問題。該產品的工作溫范圍在-34℃982℃之間。符合軍標A-907標準。
包裝規格
型號 | 包裝規格 | 每箱數量 | 產品代號 |
09128 | 8盎司毛刷瓶裝 | 12 | 09128 |
31163 | 16盎司毛刷瓶裝 | 12 | 31163 |
PRODUCT DESCRIPTION Permatex Copper Anti-Seize Lubricant ia s high temperature, permium quality copper anti-seize and thread lubricant. It contains a high percentage of micro-fine copper flakes in a non-melting petroleum base grease carrier and fortified with high quality rust and corrosion inhibitors, Meets or exceeds the requirements of Military Specification Mil-A-907E. PRODUCT BENEFITS Permatex Copper Anti-Seize was designed specifically for use on stainless steel or similar alloys. It protects threaded fasteners and fittings from heat, freezing, seizure or galling at temperatures from -30℉ to 1800 ℉. It may be used on pumps,sensors,valves,nuts and bolts where extreme condi tions of heat exist. Permatex Copper Anti-Seize also prov ides good electrical conductivity. TYPICAL APPLICATIONS ● Spark plug threads installed into aluminum heads ● Exhaust manifold and engine bolts ● Oxygen sensors ● Knock sensors ● Thermostat housing bolts ● Fuel filter fittings ● Battery cable connections DIRECTIONS:STIR WELL BEFORE USE 1. Clean mating surfaces before application. 2. For best results, apply to clean, dry surfaces. 3. Clean surfaces with Permatex Brake & Parts Cleaner. 4. Wire brush any loose surface rust. 5. Apply Copper Anti-Seize to the parts that require pro tection. 6. Reassemble parts using normal torque values. 7. Wipe off excess material. FOR CLEANUP 1.Clean parts with disposable towel. 2.Clean hands with Permatex brand hand cleaners. PROPERTIES OF MATERIAL Typical Value Chemical Type Grease Appearance Copper metallic paste Odor Light petroleum Specific Gravity 1.2 Temperature Range,℃(℉) -22(-30) to 982(1800) Viscosity, CPS 200,000(base) Flash Point,℃(℉) 149(300) NFPA 704 Flammability Rating 1 | GENERAL INFORMATION WARNING:Not for use on wheel lug nut or stud applications. This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a lubricant for chlorine or other strong oxidizing materials. For safe handling information on this product,consult the Material Safety Data Sheet,(MSDS). STORAGE Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8℃ and 28 ℃ (46℉ and 82 ℉)unless otherwise labeled. Optimal storage is at the lower half of this temperature range. NOTE The data contained herein are fumished for information only and are believed to be reliable. We can not assume responsibility for the results obtained by others over whose methods we have no control. Permatex ,Inc. specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Permatex, Inc. products and disclaims any liability for consequentianl or incidental damages of any kind, including lost profits. This product may be covered by one or more United States or foreign patents or patent applications. |
●避免與皮膚及眼睛直接接觸,請于使用時戴上塑膠手套及安全護目鏡。
●若因接觸皮膚引起過敏及紅斑,請以肥皂及清水沖洗;若不慎觸碰到眼睛時,請立即以清水沖洗并就醫診查
●勿吞食、勿讓孩童取用。
●使用本材料的工作環境須通風良好,勿在密閉空間使用。